Step 1
We start with setting the stones and the Spiral decor Metal element
Place the stone and the metal element in the Center of the stone setting and with the help of the setting tool push the prongs of the stone setting inside in order to embed the stone.
Step 2
Glue the 24pp in the center of the metal element with a little glue and a pin, we use the pin In order to control the amount of glue
Step 3
Connect the stud earring to the setting base with one 5mm jump
ring using a plaier tool
Step 4
Connect the setting base with the one top loop to the bottom
loop of the 4 loops setting base
.jpg)
Step 5
Cut the 3.7-3mm oval loop chain into two pieces, 9.5cm and
7cm
Step 6
Connect the ends of the two chains in one 5mm jump ring
Step 7
Connect the two remaining ends too in one 5mm jump ring
Step 8
Connect the two jump rings that hold the chains to the 2 side
loops of the 4 loops setting base
Beautiful with an evening dress. Enjoy your new Beautiful
earrings.
