Step 1: Organize your work environment
Prepare your tools and materials for a fast and organized working process.
Use the cutting tool and cut the chains:
4 small parts of 6cm long.
2 long parts of 28cm long
Step 2: Connect the necklace and bracelet
Slide the Lava bead on the eye pin and use the round nose plier tool to make a loop at the end of the bead.
Use 5mm jump rings to connect the Lava bead to the 39ss stone setting on one side and the long part of the chain on the other side.
Also connect the center piece with the 5mm jump rings to the small pieces of chains on each side and the chains to the 39ss stone settings.
Connect the clasp and 5cm of extension chain on each side of the bracelet, and now it's ready.
This necklace is 60cm long and can be easily worn without the need of a clasp.
Step 3: Setting the stones
The big crystals are embedded with the prong pusher tool that bends the metal prongs on the stone.
Use the E6000 glue to embed the small crystal in their place in the stone settings
Good luck!
GITA team.